Instrument lathe Troubleshooting and Maintenance
From:Taian Haishu Machinery Co.,Ltd. Updatetime:2016-8-2 10:20:05 Views:
Instrument lathe Troubleshooting and Maintenance
1, the headstock overheating
(1) spindle speed operation and prolonged fever. Solution: Adjust the bearing clearance, appropriate to reduce the spindle speed (not exceeding the maximum speed of the machine design model), high-speed bearing grease.
(2) spindle bearing clearance too tight and fever. Solution: Adjust spindle bearing clearance.
(3) spindle bearing wear rust and fever, prolonged fatigue or use in wet environments may cause the spindle parts to wear or rust; do not use long time storage can also cause rust bearings. Solution: Clean or replace the bearing grease bearing adjustment.
2, machine bed deformation
Caused by improper installation of the machine tool bed distorted too tight or jammed when moving cause large carriage. Solution: relax bolt restore it, reinstall, make sure that the work surface level with the foot of the bed (this scenario is the installation of new machines in solution).
3, the guide rail into crumbs
Loosen the large carriage guard screws and remove the large carriage shield and shield pads. Then release large carriage plate screws, remove the large carriage plate, kerosene wash the slide and rail. Period of time to replace the size of the pallet guard pad (wool felt) to prevent the iron from entering.