-
Small CNC lathe operators to strictly abide by the operating rules and routine maintenance system CNC lathe operators to strictly abide by the operating rules and routine maintenance system, the operator's technical quality of the merits of
-
1, the ellipticity of the spindle journal is directly reflected to the workpiece up, if it is sliding bearings, then when the load size and direction of the same, the main journal under load in the bearing surface pressure on a certain posi
-
-
1, the absolute level of CNC lathe adjustment in the 0.04 / 1000mm range. CNC lathes for the instrument, in addition to horizontal and non-distorted to meet the requirements, but also should be adjusted linear guide to ensure that the linea
-
Machining a part on a small CNC lathe usually takes the following steps:
1) according to the processing of parts of the drawings and process plans, with the prescribed code and program format to write a single program, and record it on the
-
In the operation of CNC lathe machining center for knife is one of the most common operation of the project, but with updated technology in the NC system mostly adopts the automatic tool change way, the three most common way by the automati
-
1, the proposed instrument CNC lathe continuous operation up to 24h, if the continuous run time is too long will affect the electrical system and part of the mechanical life of the device, which will affect the accuracy of the machine.
-
-
1, small CNC lathe rigid enough
Such as the pallet trolley loosening, transmission imbalance caused by vibration.Of course, the instability of the lathe can also cause vibration, due to vibration caused by the workpiece surface roughness r
-
Cause and Solution of Dimension Accuracy of Shaft Type Workpiece
1, because the operator is not careful, test the child when the error, or dial wrong and improper use
Therefore, in the measurement, to carefully, the correct use of the dia
-
Standard configuration
1. Spindle unit,
2. System：GSK980,
3. Hydraulic chuck,
4 .Spindle servo drive,
5. 8 station hydraulic turret,
6. Hydraulic tailstock,
7. Automatic lubrication,
8. Cooling system.
-
Today, more and more CNC lathe manufacturers want to choose a good CNC lathe manufacturers, to understand his company profile is true, the company has a real technical elite in the town, the number of Tai'an machinery Su graduated in 1985 S
